Energy Meter & Power Meter

Adl400 Three-Phase Electronic Energy Meter with Intelligent Digital Display

Product Description ADL400 three phase din rail electric meter is a smart meter designed for power supply system, industrial and mining enterprises and utilities to calculate the electricity consumption and manage the electric demand. It features LCD display, high precision, small size and simple installation. It integrates the measurement of all electrical parameters with the comprehensive electricity metering and management provides various data on previous 48 months, checks the 31st harmonic content and the total harmonic content, realizes the remote communication and the remote control with switching input and relay output and boasts the alarm output. Product Parameters Voltage Reference voltage 3*57.7/100V, 3*220/380V, 3*100V, 3*380V Reference frequency 45-65 Hz Consumption <10VA( Single phase) Current Maximum 6A,80A Starting current Direct connect:0.004 Ib Connect via:0.001 In Consumption <4VA(Single phase rated current) Measurement performance Accuracy of active kWH Class 0.5S Standards complicant IEC 62053-21:2003 Pulse Pulse width 80+20 ms Pulse constant 400 imp/kWH 6400 imp/kWH Communication Interface RS485 Protocol Modbus-RTU Outling L*W*H(mm) 72*88*70 Environment Temperature Operating:-25ºC~55ºC;Storage:-40ºC~70ºC Humidity <=95% (No condensation) Altitude <2000m Panel Dimension Networking Installation FAQ Q:After the meter is powered on, the power or energy count is inaccurate. A:Switch the meter display to the power (active power P, power factor λ) interface, and check whether the power display is negative or not. And whether the power factor is between 0.9-0.95, and then check whether the incoming and outgoing wires of the current signal wire are connected reversely (that is, the current The incoming wire must be the same as the incoming wire end of the instrument) and consistent with the wiring diagram on the instrument. Q:The instrument cannot communicate with the host computer normally after power on. A:1. The voltage value between the communication output A and B of the measuring instrument should be between +(4.4-4.5)V; 2. Check whether the communication wiring method is correctly wired in accordance with the wiring diagram requirements (that is, the communication terminal A/B of the corresponding to communication serial port A/B); After Sales Service Company Profile Acrel is a high-tech enterprise which concentrates on research, production, sales and services. It mainly provides systemic solutions of energy efficiency management and electrical safety for users. Acrel has equipped with the complete production lines from cloud platform software to sensors. Until now, it has more than 8000 sets systemic solutions used in China to help users realizing energy visual management ,supplying energy data services and improving electrical efficiency and safety.

iMeter 8 Class 0.2S Three-Phase Power Quality Analyzer 8G Memory RS-485 Ethernet

CET iMeter 8 3-Phase Class 0.2S LCD Dual Ethernet Ports Two RS-485 Ports Rogowski Coil CT Optional Advanced Power Quality Monitor The iMeter 8 is CET's Advanced PQ Analyzer designed for the compliance monitoring market as it offers un-surpassed functionality by combining Class 0.2S accuracy and advanced PQ features in a 192x192x182.4mm housing with a High-Resolution, Color Dot-Matrix LCD display. The iMeter 8 complies with such standards as IEC62053-22 Class 0.2S, IEC61000-4-30 Ed. 3.1 Class A, IEC61000-4-15, IEC61000-4-7, EN50160, IEEE Std 519-2022 as well as IEC61850 for Substation Automation. Further, it offers a large logging capacity with 8GB of on-board memory, extensive I/O, multiple Time Sync. methods, 2x100BaseT Ethernet and 2xRS-485 ports. In addition, it optionally provides 2xAO and 2xAI for different applications. These features likely make the iMeter 8 one of the most advanced PQ Analyzer for an intelligent Power Quality Monitoring System. Typical Application • PQ Monitoring at HV, MV and LV Utility Substations • Data Centers, Semiconductor Fabs, Heavy Industries • 7x24 Automated Manufacturing Facilities • Dips, Swells, Interruptions, Transients, Flickers & Harmonics Monitoring • Mains and Critical Feeder Monitoring • IEC61850 support for Substation Automation and Smart Grid • Retrofit Applications with Split-Core Current Probe (SCCP) Feature Summary Ordering Information Dimensions Technical Specifications Company Profile CET has approximately 300 R&D Engineers and a 8000 m2 R&D Center that is strategically located around some of China's Tier 1 Universities in Wuhan. CET's Production facility is located in Shenzhen's Yantian District, approximately 30 minutes by car from the headquarters, employing about 200 Production workers. CET is fully certified for RoHS manufacturing with an annual production capacity of 600,000 units.

Energy Consumption System- Temperature, Speed Sensor Power Electric Meter for Smart Factory

High-Precision Sxy88c-Sh Three-Phase Smart Meter for Energy Monitoring

Dac4301CT Three Phase RS485 Modbus DIN Rail Digital Energy Meter

Digital AC Meter Three Phase DIN Rail Energy Meter MID Certified