Telecom Tower

Self Supporting Tower Telecom Signal Tower Microwave Communication Antenna

Self Supporting Tower Telecom Signal Tower Microwave Counmunication Antenna Product Description Radio Masts and Towers (Telecommunication Towers) are typically tall structures designed to support antennas for telecommunicationsand broadcasting, including television. There are two main types: guyed and self-supporting structures. They are among the tallest human-made structures. Masts are often named after the broadcasting organizations that originally built them or currently use them. In the case of a mast radiator or radiating tower, the whole mast or tower is itself the transmitting antenna. Monopole Design 1. Design Code YD/T5131-2005, ANSI/TIA-222-G Structure Steel 2. Grade Mild Steel High Tensile Steel GB/T 700:Q235B, Q235C,Q235D GB/T1591:Q345B, Q345C,Q3455D ASTM A36 ASTM A572 Gr50 EN10025: S235JR, S235J0,S235J2 EN10025: S355JR, S355J0,S355J2 3. Design Wind Speed Up to 250 km/h 4. Allowable deflection 0.5 ~1.0 degree @ operational speed 5. Tension strength (Mpa) 360~510 470~630 6. Yield strength (t≤16mm) (Mpa) 355 235 7. Elongation (%) 20 24 8. Impact strength KV (J) 27(20°C)---Q235B(S235JR) 27(20°C)---Q345B(S355JR) 27(0°C)---Q235C(S235J0) 27(0°C)---Q345C(S355J0) 27(-20°C)---Q235D(S235J2) 27(-20°C)---Q345D(S355J2) Camouflage communication tower CZEE has a complete staff of professional engineering personnel trained in the PLS Pole program and three different manufacturing processes for producing steel towers, poles and other steel structure supports. We utilize the latest versions of PLS-CADD, PLS-POLE, TOWER, AutoCAD and other CAD software. Lattice Mast and Flying Angle Steel Tower Structure 132kv 345kv 500kv Double Circuit Steel Transmission Tower Moreover, CZEE is fully equipped and qualified to carry out Design Engineering services which includes: √ Overhead Transmission line steel tower & Telecom steel tower √ Basic Design and Analysis √ Shop Erection Drawings √ As-Built Drawings 3 Legs or 4 Legs Telecom Towers Guyed Wire Tower Lattice Mast and Flying Angle Steel Tower Structure 132kv 345kv 500kv Double Circuit Steel Transmission Tower Steel Grade 1. High strength low alloy structural steel: Q420B which is equivalent with ASTM Gr60 2.High strength low alloy structural steels: Q355B which is equivalent with ASTM Gr50 or S355JR 3. Carbon Structural Steel: Q235B which is equivalent with ASTM A36 or S235JR APPLICABLE STANDARD AND CODES All towers manufactured and design shall be generally in accordance with latest revision of the following standards except where specifically directed otherwise. General Chinese Standard American Standards: IEC 60826 - Design criteria of overhead lines IEC 60652 - Loading tests on overhead line structures ISO 1459 - Metallic coatings - Protection against corrosion by Hot Dip Galvanizing ISO 1461 - Hot dip galvanized coatings on fabricated iron and steel articles ISO 12944 - Paint coatings, corrosion protection, and structural steelwork ISO 898-1 - Mechanical properties of fasteners. Part 1-Bolts, Screws and studs ISO 630 - Structural Steels - plates, wide flats, bars, sections and profiles ISO 657 - Hot rolled structural steel plates tolerances on dimensions and shape ISO 7411 - Hexagon Bolts for high strength structural bolting with large width across flats ISO 657-5 - Hot rolled Structural Steel Sections equal and unequal leg angles ISO 7452 - Hot rolled structural steel plates tolerances on dimensions and shape BS EN 50341-1 - Overhead electrical lines exceeding AC 45kV -General Requirements BS 8004 - Code of Practice for Foundations BS 8110 - Structural use of concrete ANSI10-97

Monopole Telecommunication GSM Antenna Cell Phone Pole Mobile Tower

4 Leg Angle Steel Lattice 4G 5g Communications Telecommunication Tower

Hot Selling Single Product Aluminum Alloy Telescopic Mast 49 Feet

Durable Angle Steel Tower with Water-Based Coating for Telecom

Telecom Durable Telecommunication Transmission Line Load-Bearing Angle Steel Building Structure Power Tower