Tungsten

Tungsten Carbide Intercepting Cylinder Bushing for Oil Gas Mining Industry

Carbide Wear Parts 1. We are real factory in Zhuzhou: competitive price 2. we adopt advance production and testing equipment : good quality 3. We have professional technicians: providing professional solution and suggestion 4.100% virgin material 5.100%inspection before shipment 6. Fast response and delivery Grade Equal to ISO Category Number Performance Performance&application recommended Density G/Cm 3 Bend Strength N/mm 2 Hardness HRA YG3 K01 14.9-15.3 ≥1180 ≥90.5 Sand-blasting nozzles qualified for fine turning and half-fine turning when cast iron, non-ferrous metal, alloys as well as non-alloy materials cutting consecutively. Can make wire drawing of steel and non-ferrous metal. Also qualified for sand-blasting nozzles. YG3X K01 15.1-15.4 ≥1300 ≥91.5 YK05 14.95 2500 90.5 Mostly used as the buttons of small and bits medium sized percussion YG8C 14.8 2400 88.5 and as the inserts of rotary prospecting bits to cut soft and medium hard formations. YG6 14.95 1900 90.5 For coring crowns,electric coal drill bits, coal cutting picks,oil cone bits and scraping knife bits,used in coal geological prospecting, mining and oil well boring. YG6X K10 14.8-15.1 ≥1560 ≥91.0 Qualified for machining of chilled cast iron, alloy cast iron, refractory steel and alloy steel. Also Qualified for the machining of common cast iron. YG6A K10 14.7-15.1 ≥1580 ≥91.0 YG6 K20 14.7-15.1 ≥1670 ≥89.5 Qualified for finish machining and semi-finish machining for the cast iron, non-ferrous metal, alloy and unalloyed materials. Also qualified for wire drawing for the steel and non-ferrous metal, electric drill for geology use and steel drill etc. YG8 K30 14.6-14.9 ≥1840 ≥89 Qualified for rough machining of cast iron, non-ferrous metal, nonmetal materials, drawing of steel, non-ferrous metal and pipes, various drills for geology use, tools for machine manufacture and wearing parts. YG10X 14.5 2400 91.5 Fine grain alloy, good wear resistance,Used for processing hard wood, veneer board,PCB,PVC and metals. YG11 14.4 2600 88.5 Forming or stamping dies for metal powders and nonmental powders. YG11C K40 14.4 2700 86.5 Largely for the inserts and buttons of percussion bits and tricone bits to cut medium hard, hard and very hard formations. YG15 K40 14 2800 87.5 For fabricating drawing dies of steel tubesand rods under high compressibility ratio;punching,stamping,forging tools under large stress. YG15C 14 3000 85.5 For oil cone dril bits, for medium soft and medium-hard rocks. YG16C 13.9 2900 85.5 Impact resistance, hot&forging dies etc. YGH40 13.5-13.9 ≥2450 ≥83.0 Mainly for making hot dies. YG20 13.5 3200 85.5 For fabricating of stamping dies for watch parts, spring plates of musical instruments, battery jars,small sized steel balls,screws,screw caps. YG18C 13.7 3100 84.5 Impact resistance forging dies,hot-press forging dies and rollers. YG20C 13.5 3300 83.5 Dies for wear resistant or impact resistant application. YG22C 13.3 3500 83 Nut forming dies and high impact resistance forging dies. YG25C 13.1 3600 82.5 Stainless bolt header dies and rollers. YT15 P10 11.1-11.6 ≥1180 ≥91.0 Qualified for rough machining, semi-finish machining and finish machining during consecutive machining of carbon steel and alloy steel. YT14 P20 11.2-11.8 ≥1270 ≥90.5 Qualified for rough machining for rough face of carbon steel and alloy steel, half process during discontinuity cutting. YT5 P30 12.5-13.2 ≥1430 ≥89.5 Qualified for rough machining for rough face of carbon steel and alloy steel and discontinuity cutting. Appli

High Purity 99.95% Tungsten Cube Block 1kg Tungsten Price

Ground Cemented Carbide Short Rod Bar

18g/Cc Tungsten Super Shot Tss for Shotgun Shell of Buckshot and Birdshot

Manufacturer Supply Pure 1kg Tungsten Bar by Actual Weight

Tungsten Alloy Ring Factory Supply Balance Weight ASTM B777